AUTOMATIC, SINGLE ROLL SLITTER
The Lever model LS-6200 is designed to slit a wide range of materials such as foams, tapes, foils, rubber, non-wovens, textiles, laminates and other materials on rolls with a maximum outside diameter of 20" on a variety of core sizes. It is a heavy duty, automatic, lathe slitter designed to provide dependable long-term performance in continuous production environments with minimal maintenance requirements.
The LS-6200 features user-friendly PLC (Programmable Logic Control) operation and a color touch screen operator interface for the selection of a wide range of features including slit widths in inches or millimeters, index positioning, batch and regular cuts, interval knife grinding, multiple speed knife entry, slow knife at core, knife off at core and dwell time at the grinder and core. The LS-6200 incorporates a servomotor driven linear knife drive providing maximum torque and the ability to enable up to four different knife penetration speeds. It also features AC inverter drives for knife and chuck speed control. A servomotor powered lead screw provides precise spacing tolerances of + or - .003" and smooth, fast knife carriage movement.
Heavy Duty Construction For Reliable, Long-Term Performance
Fast, Simple Machine Set-Up
Minimum Maintenance Requirements
PLC Controlled Operation with Color Touch-Screen Operator Interface
Variable Speed, Direct Drive Operation
Separate 5 HP Variable-Speed AC Inverter Drives for Knife and Chuck Speed Control
Servomotor Driven Ball-Screw for Fast, Accurate Spacing
Servo Motor Driven Linear Actuator Knife Drive Eliminates Hydraulics
Easy Blade Installation and Removal
Three Way Cutting: Driven Blade, Free-Wheeling Blade or Locked Blade
Automatic Blade Sharpening
Adjustable Blade Spray Lubrication System (if required)
Two Direction Roll Operation
Built-in Leveling Plates
Electrical Requirements: 230 V., 40 A., 3 Ph., 60 Hz. *
Air Requirements: 5 SCFM @ 80 PSI
Maximum Roll Diameter: 20”(508mm)
Maximum Roll Width: up to 90" (2286 mm)
Minimum Core Diameter: 1" (25.4 mm), multiple core sizes available
Motors: 5 HP High Torque AC Drives (knife & chuck)
Chuck/Roll Speed: 0-600 rpm
Blade Speed: 0-500 rpm
*Note: Other electrical voltages available on request. Specifications subject to change without notice
Variety Of Rubber and Metal Shaft Sleeves
Variety Of Chucking Systems For Different Applications
Adjustable Knife Angling
Electronic Drag Brake For Slitting With Locked Knife
“CE” Certification Available